- 1726 Great Hwy San Francisco, CA 94122
- Garagedooralfonso@gmail.com
We install and repair Amarr doors across San Francisco. Their carriage-house steel collections flatter Victorian and Edwardian blocks without wood upkeep, their mainstream steel lines cover everyday rowhouses, and — the practical part — Amarr's low-headroom track hardware lets a modern sectional door fit tuck-under garages with only a few inches above the opening. Individual sections stay replaceable for years.
Amarr's catalog splits neatly along San Francisco's two big constraints: looks and clearance. On the looks side, the carriage-house steel collections — Classica's three-section proportions especially — echo the tall, narrow rhythm of Victorian and Edwardian frontages, with faux-hinge hardware and window lites that read period-correct from the sidewalk while the door itself is modern insulated steel underneath. For plainer mid-century Sunset and Excelsior facades, the standard raised-panel and flush steel lines do the quiet, tidy thing at lower cost.
On the clearance side, tuck-under garages are where Amarr wins jobs: the factory's dual-track low-headroom kit lets the door curl into the garage with only a few inches above the opening, where standard track needs a foot or more. That is frequently the difference between keeping a sectional door and settling for something clunkier.
Amarr builds on a sectional design where each panel hangs independently, so a car-bumped bottom section or a corroded edge can be replaced one section at a time, matched by series and color from the door's ID sticker. We handle the ordering, the swap, and the re-balance in a single return visit once the section lands.
Beyond sections, the wear items are the usual suspects accelerated by coastal air: hinges and end bearings, cables fraying at the bottom brackets, and low-headroom track hardware that demands precise adjustment — those dual tracks are unforgiving of drift, and a door that starts binding needs alignment before it bends something expensive.
Budget $1,200 to $2,800 installed for typical residential configurations. Standard raised-panel steel starts the range; Classica-class carriage-house styling, insulation upgrades, decorative lites, and low-headroom hardware carry it upward. Odd-sized openings — common in older SF garages — add fabrication cost, which we confirm at measurement, not after.
That is Amarr's specialty. The carriage-house collections are steel or steel-composite construction styled after swing-out doors — the hinges and handles are decorative, the door rolls up like any sectional, and the finish needs a rinse rather than repainting. On a foggy block, that maintenance difference compounds every single year.
Very likely. Amarr's low-headroom dual-track system needs only a few inches of clearance where conventional track wants twelve or more, which is exactly the geometry of SF tuck-unders. We measure headroom, side room, and backroom before ordering, and pair it with a wall-mount opener when the ceiling can't take a rail.
Often not. If the damage is confined to one or two sections and the tracks and frame check out straight, we order matching sections by the series and color on the door's sticker and swap them in. Whole-door replacement only enters the conversation when the impact racked the tracks or bent multiple sections and struts.
Related services we bundle with Amarr installs and repairs:
Every brand below gets the same insured, upfront-quoted work:
